Getting started
Driving
Turn signals
The combination switch resets automati-
cally after major steering wheel move-
ment.
̈ Switch on the ignition (୴ page 40).
Do not operate the windshield wipers when
the windshield is dry. Dust that accumulates on
a windshield might scratch the glass and/or
damage the wiper blades when wiping occurs on
a dry windshield. If it is necessary to operate the
windshield wipers in dry weather conditions,
always operate the windshield wipers with wind-
shield washer fluid (୴ page 62).
!
The combination switch is located on the
left of the steering column.
i If the combination switch is pressed to point
of resistance and released, the corresponding
turn signal will flash three times.
Windshield wipers
The combination switch is located on the
left of the steering column.
! If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off immediate-
ly.
ț
For safety reasons, stop the vehicle in a safe
location and
Combination switch
ț
remove SmartKey from starter switch
1
2
Turn signals, right
Turn signals, left
or
ț
turn off the engine by pressing the
KEYLESS-GO* start/stop button and
open the driver’s door (with the driver’s
door open, starter switch is in
position 0, same as with SmartKey
removed from starter switch)
̈
Press the combination switch in
direction of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes (୴ page 26).
Combination switch
before attempting to remove any blockage.
1
Single wipe
Wiping with windshield washer fluid
Switching on windshield wipers
2
60
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |