Operation
Tires and wheels
i Reactivate the TPMS after adjusting the tire ̈ Press the reset button (୴ page 145).
Checking tire pressure electronically
with the Advanced Tire Pressure Moni-
toring System (Advanced TPMS)*,
(Canada only)
inflation pressure to the inflation pressure rec-
The following message will appear in
ommended for the vehicle operating condition.
the multifunction display:
Restart tire
pressure monitor?
Tire pressure should only be adjusted on cold
tires. Observe the recommended tire inflation
The TPMS only functions on wheels that
are equipped with the proper electronic
sensors. It monitors the tire inflation pres-
sure, as selected by the driver, in all four
tires. A warning is issued to alert you to a
decrease in pressure in one or more of the
tires.
pressure on the placard on the driver’s door
B-pillar (୴ page 369). Some vehicles may have
supplemental tire pressure information for driv-
ing at high speeds (୴ page 375) or for vehicle
loads less than the maximum loaded vehicle con-
dition (୴ page 375). If such information is pro-
vided, it can be found on the inside of the fuel
filler flap.
̈
Press the æ button.
The following message will appear in
the multifunction display:
Tire pressure monitor
restarted
After driving a few minutes the system
verifies that the current tire inflation
pressures are within the system’s
specified range. Afterwards the current
tire inflation pressures are accepted as
reference pressures and then moni-
tored.
Tire pressure inquiries are made using the
multifunction display. The present inflation
pressures are displayed only after a few
minutes’ travel time.
̈
Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu ap-
pears in the multifunction display
(
୴ page 147).
i Possible differences between the readings
of a tire pressure gauge of an air hose, e.g. gas
station equipment, and the vehicle’s control
system can occur. Usually the readings issued by
the control system are more precise.
̈
Press the j or k button repeat-
edly until you see the following
message:
Tire pressure monitor
active
If you wish to cancel activation:
̈ Press the ç button.
Menu: R-Button
381
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Automotive readers have rated 2007 Mercedes-Benz ML320 CDI ML350 ML500 ML63 AMG Owners Manual 4.0 out of 4.0 based on 2 product reviews.