Getting started
Adjusting
Seat cushion tilt
Vehicles without memory function*:
For your protection, drive only with properly
positioned and engaged head restraints.
̈
Press the switch up or down in
direction of arrow 2 until your upper
legs are lightly supported.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Seat backrest tilt
̈
Press the switch forward or backward
in direction of arrow 4 until your arms
are slightly angled when holding the
steering wheel.
!
Do not attempt to remove front seat head
restraints. They can only be removed by qualified
technicians. We recommend that you have this
work carried out by an authorized
1
2
Head restraint
Release button
Head restraint height
Warning!
G
Mercedes-Benz Light Truck Center.
Raising:
Vehicles with memory function*:
̈ Manually adjust the height of head
restraint 1 by pulling it upward.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an
accident.
̈
Press switch 1 (୴ page 44) up or
down in direction of arrow.
If head restraint 1 is fully retracted,
push release button 2 in direction of
arrow and pull head restraint 1 up-
ward.
With a rear seat occupied, make sure to
move the respective head restraint up from
the lowest non-use position and have the
occupant adjust the head restraint properly.
Lowering:
̈
To lower head restraint 1, push
release button 2 in direction of arrow
and press down on head restraint 1.
45
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |