Operation
Engine compartment
̈
Continue turning cap 1 counterclock-
wise and remove it.
Windshield/rear window washer
system and headlamp cleaning
system*
During all seasons, add MB Windshield
Washer Concentrate “MB SummerFit” to
water. Premix the windshield washer fluid
in a suitable container.
Coolant level 4 is correct if the level:
ț
for cold coolant: reaches the top of
indicator wall 3 visible through the
filling opening
The windshield washer reservoir is located
in the engine compartment.
Warning!
G
ț
for warm coolant: is approximately
Washer solvent/antifreeze is highly flamma-
ble. Do not spill washer solvent/antifreeze
on hot engine parts, because it may ignite
and burn. You could be seriously burned.
0.6
in (1.5 cm) higher
̈
̈
Add coolant as required.
Replace and tighten cap 1.
For more information on coolant, see
“Coolants” (୴ page 549).
̈
Use the tab to pull cap 1 upwards.
୴୴
1
Cap for windshield washer fluid
reservoir
Fluid for the windshield washer system and
the headlamp cleaning system* is supplied
from the windshield washer reservoir. It
has a capacity of 8.1 US qt (7.7 l).
363
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML500, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |