2008 Chrysler Sebring Sedan Owners Manual

THINGSTOKNOWBEFORESTARTINGYOURVEHICLE
17
NOTE:
Systemserviced,bringallvehiclekeyswithyoutothe
authorizeddealer.
When having the Sentry Key௡ Immobilizer
addition,theVehicleSecurityAlarmIndicatorLightwill
begin to flash. Turn the ignition switch to the LOCK
positionandremovethesecondkey.
2
SentryKeyாProgramming
4. Insert a blank Sentry Key௡ into the ignition switch.
Turn the ignition switch to the ON position within 60
seconds.After10seconds,asinglechimewillsound.In
addition,theVehicleSecurityAlarmIndicatorLightwill
stopflashing.Toindicatethatprogrammingiscomplete,
the indicator light will turn on again for three seconds
andthenturnoff.
Youcanprogramnewkeystothesystemifyouhavetwo
valid Sentry Keys௡ by performing the following proce-
dure:
1.
CuttheadditionalSentryKey௡Transponderblank(s)
tomatchtheignitionswitchlockcylinderkeycode.
2.
Insertthefirstvalidkeyintotheignitionswitch.Turn
ThenewSentryKey௡isprogrammed.TheKeylessEntry
Transmitter will also be programmed during this pro-
cedure.
the ignition switch to the ON position for at least three
seconds, but no longer than 15 seconds. Then, turn the
ignitionswitchtotheLOCKpositionandremovethefirst
key.
Repeatthisproceduretoprogramuptoeightkeys.Ifyou
do not have a programmed Sentry Key௡ contact your
authorizeddealerfordetails.
3.
Turn the ignition switch to the ON position within 15
seconds. After ten seconds, a chime will sound.  In
Insert the second valid key into the ignition switch.
Product Specification
CategoriesChrysler Manuals, Chrysler Sebring Manuals
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 494 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)
Submit your review (optional)
(will not be displayed)
12345
* Required Field