200
UNDERSTANDINGTHEFEATURESOFYOURVEHICLE
EnablingandDisablingParkSenseா
The ParkSense switch LED will be ON when Park-
ParkSense can be enabled and disabled with a switch Sense is disabled or defective. The ParkSense switch
located in the switch bank of the instrument panel or LEDwillbeOFFwhenthesystemisenabled.
throughtheCustomer-ProgrammableFeaturessectionof
TheParkSensesystemusesfoursensorslocatedinthe
theEVIC.Theavailablechoicesare:OFF,SoundOnly,or
rear bumper fascia to scan for obstacles up to 79 in
SoundandDisplay.Referto“ElectronicVehicleInforma-
(200
cm)awayfromtherearbumperfascia.Thewarning
tion
Programmable Features)” in “Understanding Your In-
strumentPanel”forfurtherinformation.
Center
(EVIC)/Personal
Settings
(Customer-
display located above in the Instrument Cluster’s EVIC
provides both visible and audible warnings to indicate
therangeoftheobject.
When the ParkSense switch is pressed to
disablethesystem,theinstrumentclusterwill
display the “PARKASSIST OFF” message for
approximately five seconds. Refer to “Elec-
tronic Vehicle Information Center (EVIC)” in “Under-
standingYourInstrumentPanel”forfurtherinformation.
When the shift lever is moved to REVERSE and the
system is disabled, the EVIC will display the “PARK
ASSIST OFF” message for as long as the vehicle is in
REVERSE.
ServicetheParkSenseாRearParkAssistSystem
When the ParkSense Rear Park Assist System is mal-
functioning, the instrument cluster will actuate a single
chime, once per ignition cycle, and it will display the
“REAR SENSOR BLINDED” or the “SERVICE PARK
ASSIST SYSTEM” message. Refer to “Electronic Vehicle
Information Center (EVIC)” in “Understanding Your
Instrument Panel” for further information. When the
shift lever is moved to REVERSE and the system has
| Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
|---|---|
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)