STARTINGANDOPERATING
193
4LPosition
clutch pedal on a manu al transm ission. While the vehicle
is coasting at 2 to 3 mph (3 to 5 km/ h), shift the transfer
case lever firm ly to the desired position. Do not pause in
transfer case N (Neutral).
Four Wheel Drive Low Range — Locks the front and rear
driveshafts together. Forces the front and rear wheels to
rotate at the sam e speed . Additional traction and maxi-
mum pulling power for loose, slippery road surfaces
only. Do not exceed 25 mph (40 km/ h).
NOTE: Pau sing in transfer case N (Neutral) in vehicles
equ ipped with an autom atic transm ission may requ ire
shu tting the engine OFF to avoid gear clash while
completing the shift. If difficulty occurs, shift the auto-
matic transm ission to N (Neutral), hold foot on brake, 5
and turn the engine OFF. Make shift to desired mode.
ShiftingProcedure
2Hto4Hor4Hto2H
Shifting betw een 2H and 4H can be made with the
vehicle stop ped or in motion. If the vehicle is in motion,
shifts can be made up to 55 mph (88 km/ h). With the
vehicle in motion, the transfer case will engage/
disengage faster if you momentarily release the accelera-
tor pedal after completing the shift. Apply a constant
force when shifting the transfer case lever.
NOTE:
Shifting into or out of 4L is possible with the
vehicle completely stop ped, how ever, difficulty may oc-
cur due to the mating teeth not being prop erly aligned .
Several attem pts may be requ ired for clutch teeth align-
ment and shift completion to occur. The preferred
method is with the vehicle rolling at 2 to 3 mph (3 to 5
km/ h). Avoid attem pting to engage or disengage 4L with
the vehicle moving faster than 2 to 3 mph (3 to 5 km/ h).
4Hto4Lor4Lto4H
With the vehicle rolling at 2 to 3 mph (3 to 5 km/ h), shift
an autom atic transm ission to N (Neutral) or depress the
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)