WHATTODOINEMERGENCIES
241
and enou gh clearance is obtained to install the spare tire.
Minim um tire lift provid es maxim um stability.
9. Finish tightening the lug nu ts. Push down on the
wrench while tightening for increased leverage. Alternate
nu ts until each nu t has been tightened twice. Correct
wheel nu t tightness is 130 N·m (95 ft. lbs). If in doubt
abou t the correct tightness, have them checked with a
torqu e wrench by you r authorized dealer or at a service
station.
WARNING!
Raisingthevehiclehigherthannecessarycanmake
thevehiclelessstableandcauseanaccident.Itcould
slipoffthejackandhurtsomeonenearit.Raisethe
vehicleonlyenoughtoremovethetire.
10.
Remove jack assem bly and wheel blocks.
WARNING!
6
6.
7.
nu ts with cone-shap ed end tow ard wheel. Lightly tighten
nu ts clockw ise. To avoid the risk of forcing the vehicle off
the jack, do not tighten the nu ts fully until the vehicle has
been lowered .
Remove the lug nu ts and wheel.
Aloosetireorjack,thrownforwardinacollisionor
hard stop could endanger the occupants of the ve-
hicle.Alwaysstowthejackpartsandthesparetirein
theplacesprovided.
Position spare wheel/ tire on vehicle and install lug
11.
tions.
Secure the tire, jack, and tools in their prop er loca-
8.
and rem ove the jack and wheel blocks.
Lower the vehicle by turning the jack screw to the left,
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)