90
UNDERSTANDINGTHEFEATURESOFYOURVEHICLE
NOTE: If the red latch on the connector is locked , push
the red latch to the right until you can only see the latch
on one end (right) of the connector. This will unlock
connector tab, allow ing the tab to be pressed down and
enabling the harness to be disconnected from the hard
top .
NOTE: If the doors are to be rem oved , pull the #4 fuse
from the fuse block to prevent dome lamp illumination.
HardTopInstallation
NOTE:
If the door fram es are installed from soft top
usage, they must be rem oved prior to installation of the
hard top .
1.
Insp ect the hard top seals for damage and rep lace if
necessary.
2.
Install the hard top using the sam e step s for rem oval
in reverse ord er.
NOTE:
The hard top must be positioned prop erly to
ensu re sealing. Set the hard top on the wind shield fram e
so that there is no overhang. Also, make sure that the
hard top is sitting flush with the bod y at the sides and
check to ensu re that there is a uniform gap betw een the
lift glass and hard top .
9.
Remove the hard top from the vehicle.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)