Instructions for Transporters
Connect the Towing Eye
If equipped with a towing eye:
1.
Locate the towing eye in the front trunk.
The method used to connect the winch cable
depends on whether Model S is equipped with
a towing eye (located in the front trunk).
Pull up the carpet and remove the towing
eye.
If not equipped with a towing eye:
2.
Remove the nose cone.
Insert a plastic pry tool into the top right
corner, and gently pry the nose cone
toward you. When the clip releases, pull
the nose cone toward you, without
twisting or bending, to release the three
remaining clips.
Note: If the nose cone is equipped with a
removable slot, which is distinguished by
the ridge that sits directly below the slot,
remove the slot by prying it from the
bottom and around the edge until the
entire slot is removed.
1.
Attach the tow straps to the large hole on
each of the rearmost lower suspension
arms underneath the front of the vehicle.
2.
To protect the underbody from any
damage that could be caused by the tow
straps, place a 2" x 4" piece of wood
between the tow straps and the
underbody.
Caution: Before pulling, position the wood
between the tow strap and the
underbody to ensure the underbody is
protected from any damage that could be
caused by the tow strap.
176
Model S Owner's Manual
| Categories | Tesla, Tesla Model S |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Tesla, Model S |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)