Child Safety Seats
Installing LATCH Child Seats
Attaching Upper Tether Straps
Lower LATCH anchors are provided in the
second row outboard seats. The anchors are
located between the seat's back rest and rear
cushion. The exact location of each anchor is
identified by a child safety seatidentification
button, illustrated below. The button is located
on the seat back, directly above its associated
anchor.
If an upper tether strap is provided, attach its
hook to the anchor point located on the back
of the rear seats.
Always position single-strap tethers to run
over the top of the head support. For dual-
strap tethers, position a strap on each side of
the head support. Tighten according to the
child safety seat manufacturer's instructions.
Note: To prevent the single-strap tether from
moving side to side, the top of the head
support deforms.
Note: If Model S is equipped with the optional
six seat interior, a centre seating position is
not available int he second row.
Install LATCH child safety seats in the
outboard seating positions only. Use only a
seat belt retained seat in the center position.
To install a LATCH child safety seat, slide the
safety seat latches onto the anchor bars until
they click into place. Carefully read and follow
the instructions provided by the child safety
seat manufacturer.
Once installed, test the security of the
installation before seating a child. Attempt to
twist the child safety seat from side to side
and try to pull it away from the seat, then
check that the anchors are still securely in
place.
Seating and Safety Restraints
25
| Categories | Tesla, Tesla Model S |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Tesla, Model S |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)