240
STARTING AND OPERATING
thewaytothefloorandholdittherewhilecrankingthe WithTipStart
engine. This should clear any excess fuel in case the If the engine fails to start after you have followed the
engineisflooded.
“Normal Starting” or “Extreme Cold Weather” proce-
dures,itmaybeflooded.Toclearanyexcessfuel,push
theacceleratorpedalallthewaytothefloorandholdit.
Then,turntheignitionswitchtotheSTARTpositionand
releaseitassoonasthestarterengages.Thestartermotor
will disengage automatically in 10 seconds. Once this
occurs, release the accelerator pedal, turn the ignition
switchtotheLOCKposition,wait10to15seconds,then
repeatthe“NormalStarting”procedure.
CAUTION!
To prevent damage to the starter, do not crank the
engineformorethan15secondsatatime.Wait10to
15
secondsbeforetryingagain.
Iftheengineisflooded,itmaystarttorun,butnothave
enough power to continue running when the key is
released. If this occurs, continue cranking up to 15 sec-
ondswiththeacceleratorpedalpushedallthewaytothe
floor.
CAUTION!
To prevent damage to the starter, wait 10 to 15 sec-
ondsbeforetryingagain.
If the engine shows no sign of starting after two 15-
second periods of cranking with the accelerator pedal
held to the floor, repeat the “Normal Starting” or “Ex-
tremeColdWeather”procedures.
After Starting
Theidlespeedwillautomaticallydecreaseastheengine
warmsup.
| Categories | Chrysler Manuals, Chrysler Sebring Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)