Engine compartment
Engine oil drain and refill
IMPORTANTINFORMATION
With the vehicle parked on firm, levelground,
remove the filler cap and position a container
of suitable size under the drain plug in the
bottom of the sump.
DONOTpollute drains, water courses or
soil. ONLYdispose of used engine oil and
other vehicle fluids at an authorised waste
disposal site.
WARNING
Prolonged contact with used engine oil can
cause serious skin disorders, including
dermatitis and cancer of the skin. Wear
protective clothing if possible and ALWAYS
wash thoroughly after contact.
P0415
Refillthe engine with fresh oil suitable for the
climatic conditions in which the vehicle is to
be operated (precise specifications are shown
in ’General data’).
•
•
Clean the area around the drain plug.
Remove the drain plug and discard the
sealing washer
DONOToverfillthe engine! Remember that a
little oil will always remain in the engine after
draining and that, therefore, the quantity of oil
required to refillthe engine will be slightlyless
than the full capacityquoted in ’Generaldata’.
•
•
Allow the oil to drain into the container.
Clean the drain plug and its mating surface
on the sump.
•
Fit a new sealing washer to the drain plug,
fit the drain plug and tighten to 33Nm (24
lbf.ft).
After filling, allow a few minutes to elapse
before checking the levelon the dipstick(this
will allow all the oil to drain into the sump and
enable a true reading to be obtained). Once
the correct levelof oil is shown on the
dipstick, replace the filler cap.
153
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2002 |
| Download File |
|
| Language | English |
| Product Name | Range Rover |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)