Door mirrors
To disable the dip function:
Turn the starter switch to position ’I’or ’II’(do
not start the engine) and select reverse gear.
Manual adjustment
Each door mirror assembly can be moved
through four positions.
Press and hold the seat MEMORYSTORE
switch for 2 seconds, the message centre
displays ’MIRRORDIP OFF’and a tone
sounds.
The fully forward and rearward positions,
enable the mirror body to fold almost flat
against the side of the vehicle and are useful
for negotiating narrow openings. The two
intermediate positions, enable the mirror body
to be adjusted to suit the differing
requirements of either the passenger or
driver’s side of the vehicle - the forward
intermediate position should be used for the
driver’s side, and the rearward intermediate
position used for the passenger side.
To restore the dip function:
Turn the starter switch to position ’I’or ’II’(do
not start the engine), and select reverse gear.
Press and hold the MEMORYSTOREswitch
for 2 seconds and the message centre briefly
displays the message ’MIRRORDIP ON’
(returning the mirrors to either the factoryor
your own pre-set positions).
NOTE: The mirror dip function can be
individuallydisabled or restored for each seat
memory position (1 and 2). Select the
appropriate memory position before disabling
or restoring the function.
67
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2002 |
| Download File |
|
| Language | English |
| Product Name | Range Rover |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)