Wheel changing
WARNING
To prevent personal injury, before jacking
the vehicle the air suspension system must
be ’locked’ - this will prevent the suspension
from self-levelling or the ride height from
changing whilst the vehicle is supported by
the wheel changing jack.
To ’lock’the suspension:
1.
First, ensure that either Standard or High
ride height are engaged - this will provide
sufficient space beneath the vehicle to
locate and operate the jack.
Using the wheel chocks
WARNING
2.
3.
Open the tailgate.
Before raising the vehicle, it is ESSENTIAL
to chock one of the road wheels; the parking
brake acts on the transmission, not on the
rear wheels, and therefore may not hold the
vehicle when raised.
Switch on the hazard warning lights.
The hazard warning lights MUSTremain
flashing and the tailgate open THROUGHOUT
THEWHOLEwheel changing process.
If possible, position the vehicle on level
ground, chocking both sides of the wheel
diagonallyopposite the one to be removed.
If jacking the vehicle on a slope is
unavoidable, place the chocks on the downhill
side of the two opposite wheels.
The wheel chocks are stowed with the jack,
jacklever, wheel brace and steel spare wheel
beneath the loadspace floor.
173
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2002 |
| Download File |
|
| Language | English |
| Product Name | Range Rover |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)