Manual sequential programme
Engine heating programme
INTERNAL FITTINGS
(only 3.0 V6 24V version)
This function enables manual sequential
use of the gearbox merely moving the se-
lector lever to the left.
This programme allows the engine to
reach normal operating temperature in
the shortest time possible (depending on
the outside temperature) highering the
gearshifting points in relation to engine
temperature.
GLOVE BOX (fig. 108-109 )
On the dashboard there is a key-lock-
able glovebox with light. The lock can be
opened/closed using the ignition key.
To avoid overevving or excessively low
engine rpm, the control unit inhibits re-
quests for gearshifting that would cause
such situations.
To open the glovebox pull lever (A).
The programme engages automatically
after starting, if the engine temperature is
below 30°C and it remains active up to
34°C.
The compartment is lit by a courtesy
light (B) when it is open with the ignition
key at MAR .
Winter driving programme
(only 3.0 V6 24V version)
This programme engages automatically
if a driving wheel skids and it changes to
specific gears. Starting is possible only in
2nd gear.
High gearbox oil temperature
safety programme
This is activated when the gearbox oil
reaches high temperature.
To facilitate oil cooling, this programme
inhibits gearshifting, either up or down. It
is however possible to use the manual
programme
fig. 108
102
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.