The total absorption of these accessories ELECTRONIC CONTROL
out on the body of the vehicle the elec-
tronic control units must be disconnected
or removed if the work involves the pro-
duction of high temperatures.
(standard and installed later) must be
0
UNITS
.6 mA x Ah (of the battery), as shown
in the table below:
With normal use of the vehicle no par-
ticular precautions need to be taken.
Maximum permissible
loadless absorption
Battery
If interventions are to be carried out on
the electrical system or emergency start-
ing the following must be heeded:
WARNING
100
Ah
60 mA
If additional systems are
to be installed on the ve-
–
Always switch off the engine before
disconnecting the battery from the electri-
cal system.
You are also reminded that services with
high current absorption activated by the
user, such as bottle warmers, vacuum
cleaners, cellular telephone, mini refriger-
ator, etc. accelerate the battery drainage
process if they are powered with the en-
gine not running.
hicle the danger of incorrectly tak-
ing branches from the electrical
wires cannot be emphasized too
strongly especially if devices es-
sential to the safety of the vehi-
cle and its occupants are involved
(ignition, injection, ABS ...). The in-
correct installation of radio sys-
tems, electronic theft alarms, ra-
diotelephones etc. can interfere
with the electronic control units and
compromises the warranty cover.
For these interventions we re-com-
mend that you contact Alfa Romeo
Authorized Services.
–
connect it from the electric system.
If battery charging is necessary dis-
–
When starting in an emergency only
an auxiliary battery must be used and not
a battery charger.
IMPORTANT It should also be noted
that improper branches on connectors of
the electric wiring for installing additional
equipment is dangerous, particularly if
safety devices are involved.
–
Check that the polarity is correct and
that the connections between the battery
and the electrical system are sound.
–
Before connecting or disconnecting
the terminals of the electronic units en-
sure that the ignition key is not in the
MAR position.
The loadless absorption of all the
accessories installed in the after
market must not exceed 20 mA
(reading with the vehicle station-
ary).
–
Do not check for current in the cables
by short-circuiting the ends.
–
If electrical welding is to be carried
226
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.