REFITTING A NORMAL WHEEL
– Take the tool bag (A-fig. 3) and
the spare wheel and bring them near to
the wheel to be changed.
– Using the L-wrench (B-fig. 5) pro-
vided, loosen the fastening bolts (A) by
about one turn.
Refit the wheel as described below:
–
Stop the car in such a position that it
–
Remove the wheel cap (A-fig. 4)
– Position the jack under the car next
to the wheel to be replaced (fig. 6):
is not dangerous for the traffic where it is
possible to change the wheel safely.
Where possible, park on a level, compact
surface.
(if present) levering on the edge with the
flat-tipped screwdriver provided in the tool
bag.
Position 1: changing a rear wheel;
Position 2: changing a front wheel.
–
–
Engage the handbrake
–
Turn the knob (A-fig. 7) of the jack
Engage 1st gear or reverse. For cars
with automatic gearbox set the lever to
to extend it until the pin (B), on the on
the upper part of the jack inserts correctly
in the seat on the body (C).
position P.
–
–
Open the boot.
– Fit the L-wrench (A-fig. 8) on the
jack pin (B).
Fold back the boot mat (A-fig. 1).
fig. 10
fig. 9
fig. 11
fig. 12
162
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.