2003-2005 Alfa Romeo 166 Owners Manual

–
–
Release  the  clip  (C-  fig. 27 ).
– Fit  connector   to new  bulb.
WARNING
Remove   the  bulb  (D-  fig.  28 )  and
disconnect   the  snap-fitted   connector  (E).
–  Fit  the  bulb  in  the  headlight   reflector
making   the notch   coincide  with   the corre-
sponding   groove.
Any   work  on   the  front
light  units  should  be car-
ried  out  with   the  light  switch   at
position  0 (lights  off)  and with  the
ignition    key   removed    from   the
switch:    danger    of   electric    dis-
charge.
–
–
Lock  the  bulb with  the  clip.
Fit the  rubber  cap.
Xenon   bulbs    may   only
be  touched  on  the  metal
part.  If  the  glass  bulb  is
–  Refit   the  engine   compartment    cover
and  fasten  turning  the  fastening   pins.
touched   by   the  fingers,    clean   it
carefully       with    a  clean     cloth
moistened   with  methylated    spirit
and  allow  to  dry  before   refitting
the  bulb.
To  replace     the   bulb   (Type    D  –  D1,
35W):
–
Remove  the  engine   compartment   cov-
er after  turning   the fastening   pins.
–
Remove   the rubber   cap  (A-fig.  26 )
by pulling   the tab  (B).
fig.  26
fig.  27
fig.  28
168
Product Specification
CategoriesAlfa Romeo 166 Manuals, Alfa Romeo Manuals
Tags, , , ,
Model Year2003, 2004, 2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 280 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)
Submit your review (optional)
(will not be displayed)
12345
* Required Field

Comments are closed.