SPRAY JETS
BODYWORK
– Application of enamels with greater
resistance to atmospheric pollutants.
–
prevent condensation from triggering cor-
rosion from the inside.
Adoption of “open” boxed parts to
Make sure that the windscreen and
headlight washer jets deliver a jet of fluid
which is adequate and correctly directed.
PROTECTION FROM
ATMOSPHERIC AGENTS
Alfa Romeo employs manufacturing
technologies which are designed to pro-
tect the bodywork against chemical corro-
sion caused by various factors, for exam-
ple:
If the spray devices are not working
check that the supply circuit is not
blocked. If necessary unclog the nozzles
using a needle.
The underbody is treated with the appli-
cation of a special protective material.
If this protective layer requires restora-
tion the exhaust system, lambda probe
and catalytic converter must be left free
of any wax, oil, plastic and/or inflamma-
ble product.
–
–
atmospheric pollution.
Salty air and humidity (coastal areas,
hot-humid climates).
–
Road surfaces covered with salt and
This should therefore be carried out by
Alfa Romeo Authorized Services.
de-icing products during the winter.
To further increase resistance against
corrosion the following procedures have
been adopted:
–
painting system and paint products
which render the vehicle particularly resis-
tant to corrosion and abrasion.
–
Wide use of sheet metal which is ex-
tremely resistant to corrosion.
–
Spraying of the underbody, engine
bay, wheel arches and boxed parts with
suitable products which adhere strongly
to the metal parts and have a high pro-
tection capability.
228
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.