–
Raise the safety lever upwards (B-
To close:
HEADLIGHTS
fig. 142 ).
–
Lower the bonnet to approx. 20 cm.
–
Raise the bonnet.
from the engine bay, then let it drop. Try
lifting it to make sure that it is shut com-
pletely and not simply caught in the safe-
ty position.
IMPORTANT On the inside surface of
the headlight there could appear a slight
coat of fogging; this does not show a defect,
since it is a natural occurrence due to low
temperature and to the degree of humidity
in the air; it will soon disappear as soon as
the lights are turned on. The presence of
drops inside the headlight shows water seep-
age, refer to the Alfa Romeo Dealership.
WARNING
DANGER-SERIOUS IN-
JURY. When carrying out not push it down but open it again and
If the bonnet does not close properly do
checks or maintenance operations repeat the above procedure.
in the engine compartment, take
special care not to bump the head
on the raised bonnet.
WARNING
For safety reasons the
bonnet shall always be
perfectly closed when travelling.
Always check for proper bonnet
locking. If the bonnet is left inad-
vertently open, stop the car im-
mediately and close the bonnet.
IMPORTANT Bonnet raising is aided
by two gas springs. Do not tamper with
these springs and always accompany the
bonnet while raising it.
fig. 142
113
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.