SPARK PLUGS
WINDSCREEN WIPER
BLADES (fig. 24 )
– Insert a new blade passing it through
the curved top of the arm (A) through
the slot.
If the engine is running unevenly have
the spark plugs checked by Alfa Romeo
Authorized Services.
–
Lift the blade to clamp tab (B) of the
Periodically clean the wiper blades and
ensure that they are not damaged. If the
rubber blades are bent of worn in parts
they should be replaced, as follows:
coupling spring with the curved top of the
arm.
IMPORTANT The blades may differ
according to the versions. In any case,
follow the instructions provided in the
packs available as spares from Alfa
Romeo Authorized Services.
–
Press the tab (B) of the blade catch
The spark plugs must be
changed at inter vals
spring and push the blade towards the
base of the arm (A).
given
in
the
Pro-
grammed Maintenance Schedule.
Only use spark plugs of the spec-
ified type (see table of “Fuel
Supply and Ignition” in the
“Technical specifications” chap-
ter): if the thermal grade is inad-
equate, or the foreseen life is
not guaranteed inconveniences
may result.
– When the catch spring has been freed
from the curved top of the arm, withdraw
the blade from the arm through the slot.
IMPORTANT On 2.0 T.SPARK engine
removing the spark plug caps requires the
use of a special tool which avoids dam-
age: therefore for this operation you are
recommended to contact Authorized Alfa
Romeo Services.
fig. 24
227
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.