To change a wheel proceed as follows:
WARNING
Routinely check that the
pressure of tyres and s-
– Stop the car in such a position that it
is not dangerous for the traffic where it is
possible to change the wheel safely.
Where possible, park on a level, compact
surface.
The jack only serves for
changing wheels on the
pare wheel is as speci-
fied in the “Technical specifica-
tions” chapter. Raise the car only
laterally. The car must absolutely
never be raised placing the plate
of the workshop lift arm under
the aluminium crossmember of
the rear suspension.
car with which it is provided or on
cars of the same model. It must not
be used for other purposes such as
for instance raising cars of other
models. In no case should it be used
for repairs under the vehicle.
–
Engage the handbrake
–
Engage 1st gear or reverse. For cars
with automatic gearbox set the lever to
position P.
–
Open the boot.
–
Fold for ward the boot mat (A-
Do not use the jack for
higher capacities than
stated on its label.
CHANGING A WHEEL
fig. 1).
Please be informed that:
–
remove the spare wheel.
Slacken the ring nut (A-fig. 2) and
–
–
–
The jack mass is 2.100 kg.
The jack requires no adjustment.
The jack cannot be repaired, in the
Absolutely never tam-
per with the inflation
– Take the tool bag (A-fig. 3) and
bring it near to the wheel to be changed.
valve. Do not insert
event of breakage it must be replaced by
another original one.
tools of any kind be-
tween the rim and the tyre.
–
No tools other than its operating
crank can be fitted to the jack
fig. 1
159
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.