d
¢
Alfa Romeo CODE system
w
Low battery charge
Brake pad wear
This warning light should be out when the
engine is running (a slight delay is permitted
when the engine is running at idle speed).
This warning light comes on when the
brake pedal is pressed and the front
brake pads are found to be worn, have
them replaced as soon as possible. When
the ignition key is turned to MAR the
warning light comes on but must go out
after approx. 6 seconds.
When the ignition key is turned to MAR
the warning light should come on and then
go out. If the warning lights stays on with
the key in the MAR position, it indicates
a possible failure: see “The Alfa Romeo
CODE system”.
If the warning light comes on, Alfa
Romeo Authorized services should be con-
tacted immediately.
When the ignition key is moved to the
MAR position the warning light comes
on and should go out as soon as the en-
gine is started.
IMPORTANT The turning on contem-
IMPORTANT As the vehicle is fitted
with brake pad wear sensors for the front
wheels only, when these are replaced
check the back brake pads at the same
time.
poraneously of warning lights
and
¢
indicates a failure of the Alfa Romeo
CODE system.
< Seat belts not fastened
When the ignition key is turned to
MAR the warning light turns on but it
must go out after approx. 15 seconds.
For versions/markets where applicable,
the warning light turns on permanently
when, with the key in the MAR posi-
tion, the driver’s seat belt is not fastened
properly.
76
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.