–
Remove the wheel cap (A-fig. 4)
– Using the L-wrench (B-fig. 5) pro-
vided, loosen the fastening bolts (A) by
about one turn.
Position 1: changing a rear wheel;
Position 2: changing a front wheel.
(only for versions with steel rims) lever-
ing on the edge with the flat-tipped
screwdriver provided in the tool bag.
– Turn the knob (A-fig. 7) of the jack
to extend it until the pin (B), on the on
the upper part of the jack inserts correctly
in the seat on the body (C).
–
Position the jack under the car next
to the wheel to be replaced (fig. 6):
–
Fit the L-wrench (A-fig. 8) on the
jack pin (B).
–
Work the jack and raise the car, until
the wheel is a few centimetres above
ground.
–
Completely unscrew the fastening
bolts (A-fig. 9) and remove the wheel.
–
Make sure the spare wheel is clean
and free of impurities on the hub contact
surface which could cause slackening of
the fastening bolts later.
fig. 2
fig. 4
–
Install the spare wheel making the
hub pin (A-fig. 10 ) coincide with one
of the holes (B-fig. 11 ) of the wheel.
fig. 3
fig. 5
160
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.