CHARGING THE BATTERY
– Disconnect the terminals of the elec-
tric system from the battery poles.
WARNING
IMPORTANT The description of the
battery charging procedure is described
only for informative purposes. This opera-
tion should be carried out by Authorized
Alfa Romeo Services.
When doing any work on
the battery or near it, al-
ways wear special protective gog-
gles.
– Connect the charger cables to the bat-
tery.
–
–
Turn on the charger.
After charging turn off the charger be-
fore disconnecting it from the battery.
Charging should be slow at a low amp
rating for about 24 hours. Charging for a
longer time may damage the battery.
– Re-connect the terminals to the bat-
tery poles correctly.
WARNING
Working with the fluid
level too low damages
the battery irreparably, even
breaking the body and completely
leaking the acid contained.
Charge the battery as follows:
– Turn the ignition key to MAR and
leave it in this position for 30 seconds to
–
If the car is fitted with an alarm sys-
tem, turn off the alarm with the remote
control and deactivate the system turning
the emergency key to “OFF ” (see “Elec-
tronic alarm” in the chapter “Getting to
know your car”).
1
to 10 seconds, after which the engine
can be started.
minute, then turn to STOP for about 5
–
Remember to reactivate the alarm
system (if present) turning the emer-
gency switch to “ON ”.
The wrong electric and
electronic accessory in-
stallation may cause se-
vere vehicle damages.
224
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.