Move the gearshift lever to position P
with the car stationary and the engine
idling before switching off.
R - Reverse
WARNING
Move the gearshift lever to R with the
vehicle stationary, the engine idling and
the brake pedal pressed.
Before moving the lever,
press the brake pedal:
the car must be stationary.
For safety reasons the ignition key can
only be removed with the gearshift lever
in this position.
To prevent accidental movements, the
lever can only be moved to this position
with the button (C-fig. 104 ) pressed.
N - Neutral
WARNING
With the lever in position R the revers-
ing lights turn on and a buzzer will sound
for about 5 seconds.
This is the neutral position to be used if
the car is to be pushed or towed.
Before moving the lever
from position P, press the
brake pedal: the vehicle must be
stationary.
With the gearshift lever in this position,
keep the car braked pressing the brake
pedal.
IMPORTANT With the lever in posi-
tion R, reverse gear is not engaged if the
vehicle speed exceeds the established
limit. When the speed falls below this val-
ue, reverse gear engages and stays en-
gaged even if the limit is exceeded.
In case of emergency (low battery), it is
possible to move the lever from position
P, pressing on the lever lock device (B-
fig. 107 ) through the plugged hole (A-
fig. 106 ).
You are advised to have this operation
carried out by Authorised Alfa Romeo Ser-
vices.
fig. 106
fig. 107
96
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.