CHECKING AND TOPPING UP
THE WINDSCREEN/HEADLIGHT
WASHER FLUID (fig. 19-20 )
When the cap (B) is
screwed off the reser-
WARNING
Some commercial addi-
tives for windscreen
washers are inflammable. The en-
gine compartment contains hot
components which could set it on
voir ensure that the
electrical connections are not dis-
connected. Do not allow the
liquid to come into contact with
painted components. If it does,
wash it off immediately with
water.
Access to the windscreen/headlight
washer fluid reservoir, remove the cover
(A-fig. 19 ) after turning the pins (B).
Then remove the cap (C-fig. 20 ) and
pour the fluid in the tank until the level
can be seen through the filler neck.
Then close the filler with the cap and re-
fit the cover fastening with the two pins.
To avoid damaging the
pump motor do not use
WARNING
Symbol π on the con-
tainer indicates synthetic
type brake fluid distinguishing it
from the mineral kind. Using min-
eral type fluids damages the spe-
cial rubber braking system gaskets
beyond repair.
the windscreen washers
when the reservoir is empty.
WARNING
Brake and clutch fluid is
poisonous and corrosive.
In the event of contact wash the
parts concerned immediately with
neutral soap and water, then rinse
thoroughly. See a doctor at once if
the fluid is swallowed.
fig. 19
fig. 20
220
| Categories | Alfa Romeo 166 Manuals, Alfa Romeo Manuals |
|---|---|
| Tags | Alfa Romeo 166 2.0 T.SPARK, Alfa Romeo 166 2.5 V6 24V, Alfa Romeo 166 3.0 V6 24V, Alfa Romeo 166 3.2 V6 24V, Alfa Romeo 166 JTD |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.