Controls in detail
Locking and unlocking
Opening doors from the inside
i If the vehicle has been locked with the
i If you hear a warning signal you have forgot-
SmartKey or KEYLESS-GO*, opening a door from ten to switch off the low beam headlamps or the
the inside will trigger the anti-theft alarm system. parking lamps before opening the driver’s door.
You can open a locked door from the in-
side. Open door only when conditions are
safe to do so.
To cancel the alarm, do one of the following:
In addition the message “Please Switch Off
Lights” appears in the multifunction display.
ț
Insert the SmartKey or SmartKey with
KEYLESS-GO* in the starter switch.
Switch off the low beam headlamps or the park-
ing lamps.
ț
Press button Œ or ‹ on the SmartKey
or SmartKey with KEYLESS-GO*.
If the message “Turn Lights Off or Remove Key”
appears in the multifunction display remove the
SmartKey from the starter switch or switch off
the automatic headlamp mode.
In vehicles with KEYLESS-GO*:
ț
Grasp an outside door handle.
The SmartKey with KEYLESS-GO* must be
within 3 ft (1 m) of the vehicle.
!
Failure to switch off the exterior lamps when
leaving the vehicle may result in a discharged
battery.
ț
Press the KEYLESS-GO* start/stop button
(୴ page 366).
̈
Pull on door handle 2 on the respec-
tive door to open door.
1
2
Locking knob
Inside door handle
The SmartKey with KEYLESS-GO* must be
inside the vehicle.
If the door was locked, locking knob 1
will move up.
i When you open a door, the side window on
that side lowers slightly. Once you close the
door, the window moves up again.
362
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet