Practical hints
Replacing wiper blades
Placing wiper arms in vertical position
G
!
To avoid damage to the hood:
Warning!
ț
The wiper arms should only be folded for-
ward when in the vertical position.
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status 0) before replacing a wiper blade.
Otherwise, the wiper motor could suddenly
turn on and cause injury.
ț
Never open the hood when the wiper arm is
folded forward.
! Hold on to the wiper when folding the wiper
arm back. If released, the force of the impact
from the tensioning spring could crack the wind-
shield.
Do not allow the wiper arms to contact the wind-
shield glass without a wiper blade inserted.
G
Wiper blades in vertical position
Warning!
For your convenience, we recommend that you
have this work carried out by an authorized
Mercedes-Benz Center.
̈ Make sure the hood is fully closed.
Wiper blades are components that are sub-
ject to wear and tear. Replace the wiper
blades twice a year, preferably in the spring
and fall. Otherwise the front window will not
be properly wiped. As a result, you may not
be able to observe surrounding traffic condi-
tions and could cause an accident.
Vehicles with SmartKey
̈
̈
̈
Turn SmartKey in starter switch
position 1.
Turn combination switch to wiper
setting u (୴ page 400).
With wiper arm in vertical position, turn
the SmartKey in starter switch to
position 0.
694
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet