Practical hints
Jump starting
̈
̈
Remove red cover from positive
terminal 4.
̈ Get into vehicle and start engine within ̈ While the engine is running, switch off
30 seconds.
several electrical consumers such as
the blower.
Connect positive terminal 3 of the
charged battery with positive
terminal 4 of the discharged battery
with the jumper cable. Clamp cable to
charged battery 3 first.
If the starting attempt does not suc-
ceed:
̈ Disconnect jumper cables first nega-
tive clamp 1 from ground point and
negative terminal 2, then from posi-
tive terminals 4 and 3.
̈
Turn the SmartKey in starter switch
to position 0.
̈
̈
Take out the SmartKey.
̈ Have the battery checked at the near-
est authorized Mercedes-Benz Center.
!
Never invert the terminal connections.
Turn off engine of donor vehicle, re-
start it and let it run at idle speed
for several minutes.
̈
Connect negative terminal 2 of
charged battery to jumper cables and
attach other end of the jumper cable
with the negative clamp 1 to a suit-
able ground point on the vehicle.
̈
̈
̈
Disconnect the jumper cable during
this time.
Reconnect jumper cable as de-
scribed before.
Restart engine.
709
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet