Safety and Security
Occupant safety
Installation of infant and child restraint
systems
Head restraints must be positioned such
that the top tether strap can pass freely
between the head restraint and top of seat
back.
Once the top tether anchorage hook is at-
tached, the child restraint itself can be se-
cured. Tighten the top tether strap
according to the child restraint manufac-
turer’s instructions.
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.
̈ Make sure the tether strap is not
twisted.
̈ Reinstall cover after removing the
tether strap.
Child seat anchors – LATCH type
This vehicle is equipped with two LATCH
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the rear seats) for
the installation of a LATCH child seat with
the matching anchor fittings.
1
̈
Cover of top anchorage ring
G
Warning!
2
3
Hook
Anchorage ring
Remove cover 1 from anchorage ring.
Store cover 1 in a convenient place
(e.g. glove box).
Children too big for a toddler restraint must
ride in seats using regular seat belts. Posi-
tion. Position shoulder belt across chest and
shoulder, not face or neck. A booster seat
may be necessary to achieve proper seat
belt positioning for children over 41 lbs until
they reach a height where a lap/shoulder
belt fits properly without a booster.
̈
̈
Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 3.
̈
Guide tether strap between head re-
straint and top of seat back.
i For safety reasons, make sure hook 2
attached to ring 3 beyond the safety catch, as
illustrated.
has
୴୴
61
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet