Controls in detail
Driving and parking
୴
୴̈ Do not depress accelerator.
Starting difficulties
̈ If you are starting the engine with
KEYLESS-GO*: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
̈
Press KEYLESS-GO start/stop button
once.
!
Remember that extended starting attempts
can drain the battery.
The engine starts if the SmartKey with
KEYLESS-GO is in the vehicle.
KEYLESS-GO*.
The engine does not start. You can hear
the starter.
or
i You can also start the engine with the auto-
matic transmission set to neutral position N.
There could be a malfunction
̈ Remove the KEYLESS-GO* start/stop
button from starter switch.
ț
ț
in the engine electronics, or
in the fuel supply system
i If you wish to start the vehicle with the
SmartKey instead of the KEYLESS-GO feature,
remove the KEYLESS-GO start/stop button from
the starter switch and proceed as described in
“Starting with the SmartKey” (୴ page 407).
̈
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO*.
Carry out the following steps:
̈
If you are starting the engine with the
SmartKey: Turn SmartKey in starter
switch to position 0 and repeat starting
procedure.
For information on turning off the engine
with KEYLESS-GO, see “Turning off the en-
gine” (୴ page 415).
̈ Repeat the starting procedure
(୴ page 406).
If the engine does not start after several
starting attempts:
̈
̈
Call Roadside Assistance.
Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.
408
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet