Controls in detail
Driving systems
Deactivating DISTRONIC Plus
DISTRONIC Plus deactivates automatically
when:
If the vehicle has been stopped by
DISTRONIC Plus and a malfunction occurs
in the system, the message “Brake Immedi-
ately” will appear on the multifunction dis-
play. Step on the brake immediately to
prevent the vehicle from rolling.
There are several ways to deactivate the
DISTRONIC Plus system:
ț
the vehicle is secured with the elec-
tronic parking brake
̈
Briefly tip the DISTRONIC Plus lever in
the direction of arrow 3 (୴ page 449).
ț
the vehicle speed is below 20 mph
(30
km/h) and no preceding vehicle is
DISTRONIC Plus is then switched off and
the message disappears.
or
detected
̈
Step on the brake pedal.
ț
ț
the ESP is in operation or switched off
®
®
with the ESP switch (୴ page 72)
Warning!
G
DISTRONIC Plus will be deactivated.
The last speed set will be stored into
memory.
you set the automatic transmission to
park position P, reverse gear R, or neu-
ral position N while driving
DISTRONIC Plus switches off and releases
the brakes when the vehicle decelerates be-
low the minimum speed of 20 mph
i The last stored set speed is deleted when
the engine is turned off.
ț
ț
the radar sensors are switched off
(30
km/h) by operation of the system un-
(
୴ page 302)
less DISTRONIC Plus detects a vehicle di-
rectly ahead of you. At that time the driver
must apply the brakes in order to reduce ve-
hicle speed further or bring it to a stop.
the vehicle rolls backward
The segments in the multifunction display
go out, an acoustic signal sounds, and the
message “DISTRONIC PLUS Off” appears in
the multifunction display for approximately
5
seconds.
456
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet