Practical hints
What to do if …?
Lamps in instrument cluster
General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the igni-
tion, have the respective bulb checked and
replaced if necessary.
Problem
Possible cause/consequence
Suggested solution
-
The yellow Antilock
Brake System (ABS)
®
indicator lamp comes on PRE-SAFE are also switched off (see mes-
The ABS has detected a malfunction and
̈ Continue driving with added caution.
®
has switched off. The BAS, ESP , EBP and Wheels may lock during hard braking,
reducing steering capability.
while the engine is run-
ning.
sages in multifunction display).
̈
Read and observe messages in the mul-
tifunction display (୴ page 622).
The brake system is still functioning nor-
mally but without the ABS available.
̈
Have the system checked at an autho-
rized Mercedes-Benz Center as soon as
possible.
If the ABS control unit is malfunctioning,
other systems such as Parktronic*,
DISTRONIC Plus*, navigation system, Park
Assist* and the automatic transmission
may also be malfunctioning.
Failure to follow these instructions increas-
es the risk of an accident.
608
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet