Practical hints
What to do if …?
Problem
Possible cause/consequence
Suggested solution
-
The yellow Antilock
Brake System (ABS)
indicator lamp comes on
while the engine is run-
ning.
The charging voltage has fallen below
10 volts. The ABS has switched off.
The battery may not be charged sufficiently. dicator lamp should go out.
When the voltage is above this value again,
the ABS is operational again and the ABS in-
If the ABS indicator lamp does not go out:
̈
Have the generator (alternator) and the
battery checked.
When the voltage is above this value again,
the ABS is operational again.
;
(USA only)
The red brake warning
lamp comes on while the portioning (EBP) was detected. The ABS,
engine is running. In addi- BAS, ESP
A malfunction in the Electronic Brake Pro-
̈ Continue driving with added caution.
Wheels may lock during hard braking,
reducing steering capability.
®
and PRE-SAFE are also
®
3
(Canada only)
tion, the yellow ABS mal- switched off (see messages in multifunction ̈ Read and observe messages in the mul-
function indicator lamp, display).
tifunction display (୴ page 622).
-
v
and the yellow ESP
®
The brake system continues to function
normally, but without electronic support.
̈
Have the system checked at an autho-
rized Mercedes-Benz Center as soon as
possible.
warning lamp come on
and an acoustic warning
sounds.
Failure to follow these instructions increas-
es the risk of an accident.
609
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet