Controls in detail
Lighting
Daytime running lamp mode
Canada only
The corresponding exterior lamps
switch on (୴ page 391).
In Canada the daytime running lamp mode
is mandatory and therefore in a constant
mode.
i With the exterior lamp switch in position
M
beam headlamps.
or
*, you cannot switch on the high
USA only
The high beam flasher is available at all times.
i With the daytime running lamp mode
activated and the exterior lamp switch in
position M, you cannot switch on the high
beam headlamps.
In the USA the daytime running lamp mode
is deactivated by default. Activate the day-
time running lamp mode using the control
system, see “Setting daytime running lamp
mode (USA only)” (୴ page 301).
For nighttime driving you should turn the exterior
lamp switch to position B to permit activa-
tion of the high beam headlamps.
The high beam flasher is available at all times.
When the engine is running, and you shift
from a driving position to neutral
position N or park position P, with the ve-
hicle at a standstill the low beam head-
lamps will switch off with a delay of
For nighttime driving you should turn the exterior
lamp switch to position B or * to permit
activation of the high beam headlamps.
̈
Turn exterior lamp switch to
position M or *.
When the engine is running, the low
beam headlamps are switched on.
When the engine is running, and you turn
the exterior lamp switch to position C
or B, the manual headlamp mode has
priority over the daytime running lamp
mode.
3
minutes.
In low ambient light conditions, the fol-
lowing lamps will switch on additional-
ly:
When the engine is running, and you
ț
turn the exterior lamp switch to
position C, the low beam head-
lamps, the tail and parking lamps, the
license plate lamps and the side mark-
er lamps switch on.
The corresponding exterior lamps switch
on (୴ page 391).
ț
ț
ț
Tail and parking lamps
License plate lamps
Side marker lamps
ț
turn the exterior lamp switch to
position B, the manual headlamp
mode has priority over the daytime run-
ning lamp mode.
i With the daytime running lamp mode activat-
ed and the engine running, the low beam head-
lamps cannot be switched off manually.
393
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet