Controls in detail
Automatic transmission
Shifting from D or R to N
Shifting procedure
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the op-
erating temperature has been reached.
If you want to select neutral position N
with the transmission being in drive
position D or reverse gear R:
The automatic transmission selects indi-
vidual gears automatically, depending on:
Shift into reverse gear R or park position P only
when the vehicle is stopped.
ț
drive position D (୴ page 421) with
gear ranges (୴ page 426)
̈
With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
ț
the selected program mode:
̈
Press the handle for electronic parking
brake (୴ page 412).
(C/S) (୴ page 427)
or
i When the vehicle needs to be moved with
the engine switched off and the transmission set
to neutral position N (୴ page 421), do not press
the handle for electronic parking brake.
With drive position D selected, you can use
the steering wheel gearshift control
buttons (୴ page 429) or gearshift control
paddles (୴ page 429) to influence trans-
mission shifting by:
(
M/C/S) (CL 63 AMG and CL 65 AMG
only) (୴ page 430)
ț
ț
the position of the accelerator pedal
̈
Move gear selector lever up to resis-
tance point when in drive position D or
down to resistance point when in
reverse gear R to select neutral
position N.
(
୴ page 424)
ț
ț
limiting the gear range
the vehicle speed
changing gears manually
̈
Release the brake pedal.
420
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet