Operation
Engine compartment
Windshield washer system and
headlamp cleaning system
During all seasons, add MB Windshield
Washer Concentrate “MB SummerFit” to
water. Premix the windshield washer fluid
in a suitable container.
!
Always use washer solvent/antifreeze
where temperatures may fall below freezing
point. Failure to do so could result in damage to
the washer system/reservoir.
The washer fluid reservoir is located on the
left-hand side of the engine compartment
when looking in the direction of travel. It
supplies the windshield washer system
and headlamp cleaning system with wash-
er fluid.
Only use washer fluid which is suitable for plastic
lenses. Improper washer fluid can damage the
plastic lenses of the headlamps.
Warning!
G
Do not use distilled or de-ionized water in the
washer fluid reservoir. Otherwise, the washer
fluid level sensor could be damaged.
Washer solvent/antifreeze is highly flamma-
ble. Do not spill washer solvent/antifreeze
on hot engine parts, because it may ignite
and burn. You could be seriously burned.
̈
To close washer fluid reservoir:
Press cap 1 onto filler hole until it en-
gages.
̈
̈
To open washer fluid reservoir: Pull
tab of cap 1 upward.
For more information, see “Windshield
washer system and headlamp cleaning
system” (୴ page 741).
Refill the reservoir with MB Windshield
Washer Concentrate and water (or
commercially available premixed wind-
shield washer solvent/antifreeze, de-
pending on ambient temperatures).
1
Cap
Fluid for the windshield washer system and
the headlamp cleaning system is supplied
from the windshield washer reservoir. It
has a capacity of approximately 6.87 US qt
(6.5
l).
560
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet