Controls in detail
Automatic transmission
̈
Press the program mode selector
switch repeatedly until the letter of the
desired program mode appears in the
multifunction display.
Select S for standard driving
(CL 63 AMG and CL 65 AMG: sporty
driving):
Steering wheel gearshift control
With drive position D selected and driving
in program mode C or S, you can limit or
extend the gear range.
ț
ț
The vehicle starts out in first gear.
Upshifts occur later.
Select C for comfort driving
(CL 63 AMG and CL 65 AMG: standard
driving):
If your vehicle is equipped with manual
shift program M, you can use the steering
wheel gearshift control to manually shift
the gears.
ț
The vehicle starts out in second
gear (both forward and reverse) for
gentler starts. This does not apply if
full throttle is applied or gear
range 1 is selected.
i CL 63 AMG and CL 65 AMG only:
For information on using the steering wheel gear-
shift control in program mode M, see “Manual
shift program (CL 63 AMG and CL 65 AMG
only)” (୴ page 430).
ț
ț
Traction and driving stability are
improved on icy roads.
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the op-
Upshifts occur earlier even when
you give more gas. The engine then
operates at lower rpms and the
wheels are less likely to spin.
erating temperature has been reached.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
428
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I guess it good but I have not seen it yet