Practical hints
Replacing bulbs
IR emitter*
̈ Turn bulb holder 1 clockwise until it
engages and wire 2 points downward
and to the left.
Replacing bulbs for the rear lamps
Tail lamp unit
Additional turn signal lamp bulbs
The tail lamp unit is equipped with HiP
bulbs and LED’s.
The additional turn signal lamps in the ex-
terior rear view mirrors have LEDs.
Warning!
G
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the turn signal unit replaced
by an authorized Mercedes-Benz Center.
The bulbs in the tail lamp unit cannot be re-
placed individually. The tail lamp bulbs are
under pressure and could explode during an
attempt to replace them.
1
2
Bulb holder
Wire position
Front side marker lamp bulbs
̈
Turn bulb holder 1 counterclockwise
If the tail lamps (HiP bulbs and/or LED’S)
are malfunctioning, have them replaced at
an authorized Mercedes-Benz Center.
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.
until it disengages.
̈
̈
Take out bulb holder 1.
Press both catches on left and right
sides of bulb holder 1 and take bulb
out of holder.
̈
̈
Insert new bulb into holder until it en-
gages.
Insert bulb holder 1 into guide in
headlamp. Wire 2 must point down-
ward and to the right.
693
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL550, Mercedes-Benz CL600, Mercedes-Benz CL63 AMG, Mercedes-Benz W216 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 5 out of 5)
Automotive readers have rated 2008 Mercedes-Benz CL550 CL600 CL63 AMG CL65 AMG Owners Manual 5.0 out of 5.0 based on 3 product reviews. I guess it good but I have not seen it yet