3.
Select "MDrive" and press the controller.
5.
6.
Press the controller.
Turn the controller to select the desired set-
ting.
The functions contained in MDrive are dis-
played:
>
"SMG Drivelogic"
"Unchanged" retains the current setting
made outside of MDrive.
Sequential Manual Transmission with
Drivelogic: shifting modes and Drivel-
ogic driving programs, refer to page 62
7.
Press the controller.
The setting is stored for the remote control cur-
rently in use.
>
>
>
>
>
"EDC"
Programs of the Electronic Damping
Control, refer to page 83
Activating settings
"DSC"
Dynamic Stability Control and
M Dynamic Mode, refer to page 81
Press the
button on the steering wheel.
The indicator lamp in the instrument
cluster lights up. The settings made on
the Control Display for the functions
"POWER"
Programs of the M Engine Dynamics
Control, refer to page 59
contained in MDrive are active.
Pressing the button again deactivates MDrive.
"Backrest"*
Programs of the active backrest width
adjustment, refer to page 44
If the indicator lamp flashes after the but-
ton was pressed, MDrive was unable to
respond because the ABS Antilock Brake Sys-
tem or DSC Dynamic Stability Control are cur-
rently regulating driving stability. Press the
button again when the indicator lamp no
longer flashes.<
"Head-Up Display"*
Views of the Head-Up Display, refer to
page 90
You can reset all settings for MDrive to the
default values:
Even with MDrive activated, you can change
individual settings outside MDrive, e.g. with the
buttons in the center console. To reactivate all
settings made for MDrive on the Control Dis-
>
"Reset to default"
4.
Select the desired function.
play: press the
button twice.
53
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E60, BMW M5 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)