Adaptive Head Light*
Switching on
After parking the vehicle, press the lever up or
The concept
down beyond the resistance point, arrow 3.
Adaptive Head Light is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
The roadside parking lamps drain the bat-
tery. Do not leave them switched on for
long periods of time, otherwise it may no longer
be possible to start the engine.<
Switching off
In tight curves at speeds up to approx. 45 mph/
70 km/h, e.g. on mountainous roads or when
negotiating curves, turning lamps are switched
on that light up the inside area of the curve.
Briefly press the lever in the opposite direction
up to the resistance point, arrow 3.
Activating the Adaptive Head Light
High-beam assistant*
With the ignition switched on, turn the light
switch into position 3, refer to page 93.
The concept
The turning lamps are automatically switched
on depending on the steering angle or the use
of turn signals.
This system automatically switches the high
beams on and off. A sensor on the front side of
the inside rearview mirror controls the process.
The assistant makes sure that the high beams
are switched on whenever traffic conditions
permit. This relieves you of the burden of con-
stantly switching back and forth and simulta-
neously provides you with the best possible vis-
ibility. Naturally, you can intervene at any time to
switch the high beams on and off as usual.
To avoid blinding oncoming traffic, the Adaptive
Head Light directs light towards the front pas-
senger side when the vehicle is at a standstill.
When driving in reverse, only the turning lamps
are active and illuminate the outer area of
curves.
Activating system
High beams/
roadside parking lamps
1.
Turn the light switch to position 3, refer to
page 93.
2.
With the low beams switched on, briefly
press the turn signal lever in the high-beam
direction.
1
2
3
High beams
Headlamp flasher
Roadside parking lamps
The indicator lamp in the instrument
cluster lights up when the high-beam
assistant is activated. The system
Roadside parking lamps, left or right*
You also enjoy the option of lighting up just one
side of your vehicle when parking.
automatically switches between high beams
95
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E60, BMW M5 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)