Controls in detail
Lighting
USA only
Locator lighting and night security
illumination
Fog lamps
Warning!
i With the exterior lamp switch in
position M, you cannot switch on the high
beam headlamps.
G
The locator lighting and the night security
illumination are described in the “Control
system” section, see “Setting locator light-
ing” (୴ page 171) and “Setting night secu-
rity illumination” (୴ page 171).
In low ambient lighting or foggy conditions,
only switch from position U to B
The high beam flasher is available at all times.
with
For nighttime driving turn the exterior lamp
switch to position B or U to permit
activation of the high beam headlamps.
the vehicle at a standstill in a safe location.
Switching from U to B will briefly
switch off the headlamps. Doing so while
driving in low ambient lighting conditions
may result in an accident.
When the engine is running, and you turn
the exterior lamp switch to position C
or B, the manual headlamp mode has
priority over the daytime running lamp
mode.
i Fog lamps will operate with the parking
lamps and/or the low beam headlamps on. Fog
lamps should only be used in conjunction with
low beam headlamps. Consult your State or
Province Motor Vehicle Regulations regarding
permissible lamp operation.
The corresponding exterior lamps switch
on (୴ page 135).
i Fog lamps cannot be switched on with the
exterior lamp switch in position U.
To switch on the fog lamps, turn the exterior
lamp switch to position B first.
138
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Comments are closed.