Practical hints
Flat tire
G
!
Depending on vehicle production date your
Warning!
vehicle may be equipped with a scissors-type
jack (located under the cargo compartment
floor). If so equipped, only use this jack when
jacking up the vehicle as otherwise the vehicle’s
underbody can be damaged. See separate
instructions for scissors-type jack.
The jack is designed exclusively for
jacking up the vehicle at the jack take-up
brackets. Make sure the jack arm is fully
seated in the jack take-up bracket.
If you do not position the jack correctly in
the jack take-up bracket, the vehicle can:
ț
ț
fall off the jack
Scissors-type jack
seriously or fatally injure you or others
2
3
4
Take-up bracket
Jack
Ratchet
!
vehicle, as this may cause damage to the
vehicle.
Do not position the jack on the body of the
̈ Vehicles with scissors-type jack:
Attach reversible ratchet 4 to vehicle
jack in such a way that the word UP
can be seen.
Depending on production date, your vehi-
cle may be equipped with either a
screw-type vehicle jack or a scissors-type
jack, see “Vehicle jack” (୴ page 450).
Screw-type jack
2 Take-up bracket
3 Jack
̈ Place jack 3 on firm ground.
4
Crank
̈
Position jack 3 under the take-up
bracket 2 so that it is always vertical
(plumb-line) as seen from the side,
even if the vehicle is parked on an
incline.
482
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.