Controls in detail
Automatic transmission
Shifting from D or R to N
Shifting procedure
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
If you want to select neutral position N
with the transmission being in drive
position D or reverse gear R:
The automatic transmission selects indi-
vidual gears automatically, depending on:
Shift into reverse gear R or park position P only
when the vehicle is stopped.
ț
ț
ț
ț
drive position D (୴ page 187) with gear
ranges (୴ page 192)
̈
With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
the selected program mode (M/C/S)
(ML 63 AMG only) (୴ page 194)
̈
Step firmly on parking brake pedal
(
୴ page 65).
the position of the accelerator pedal
i When the vehicle needs to be moved with
the engine switched off and the transmission set
to neutral position N (୴ page 184), do not
depress the parking brake pedal.
(
୴ page 190)
With drive position D selected, you can use
the steering wheel gearshift control
buttons (୴ page 193) to influence trans-
mission shifting by:
the vehicle speed
̈
Move gear selector lever up to resis-
tance point when in drive position D or
down to resistance point when in
reverse gear R to select neutral
position N.
ț
ț
limiting the gear range
changing gears manually
̈
Release the brake pedal.
186
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.