Controls in detail
Loading
Installing blind
Removing blind
Cargo net*
Warning!
i Before installing cargo compartment cover
blind behind the front seats, fold the rear seats
forward.
G
̈
̈
Place left side of blind 2 in left mount.
Make sure the cargo net is properly engaged
at top and bottom position and the tighten-
ing belts are securely fastened.
Position right side of blind 2 over right
mount.
Never use a damaged cargo net.
̈
̈
Press release button 1 and guide
cover 2 into mount.
To help avoid personal injury from smaller
objects being thrown around in the occu-
pant compartment during a collision or sud-
den maneuver, always use cargo net when
transporting cargo.
Make sure the cargo compartment
cover blind is securely fastened.
1 Release button
2 Blind
̈
Roll the blind up (୴ page 271).
The cargo net cannot prevent the movement
of large, heavier objects into the passenger
compartment in an accident. Such items
must be properly secured using the cargo
tie-down rings (୴ page 268) in the cargo
compartment floor.
i Before removing cargo compartment cover
blind behind the rear seats, fold the left or right
rear seat forward. Afterwards, return the left or
right rear seat into its original position.
̈
̈
Push release button 1.
Pull blind 2 to the left against the
spring pressure until the spring in the
cover audibly engages.
Passenger use of seats behind installed
cargo net is restricted because of the
footwell being taken up by the net.
̈
Remove the blind.
272
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.