Controls in detail
Power windows
Synchronizing the door windows
Summer opening feature
i If the upward movement of a door window is
blocked during the closing procedure, the door
window will stop and open slightly.
The door windows must be resynchronized
If the weather is warm, you can ventilate
the vehicle before driving off by simulta-
neously:
̈
̈
Remove the obstruction.
ț
ț
after the battery was disconnected
Pull the respective door window switch
past the resistance point again and
release.
if the door windows cannot be fully
opened (Express-open) or closed
(Express-close)
ț
ț
ț
opening the door windows
opening the tilt/sliding sunroof
switching on the seat ventilation* for
the driver’s seat
i If the door window still does not close when i Each door window must be resynchronized
there is no obstruction, pull and hold the respec- separately.
tive power window switch. The door window will
then close without the obstruction sensor
function.
̈
̈
̈
Close all doors.
Switch on the ignition (୴ page 40).
Pull and hold switch 1, 2, 3, or 4
Stopping door windows during
Express-operation
(୴ page 236).
Once a door window is closed com-
pletely, hold the respective switch for
approximately 3 seconds.
̈
Press or pull the respective door
window switch again.
The door window is synchronized.
୴୴
237
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.