Practical hints
Flat tire
Lowering the vehicle
Warning!
̈ Store jack and all other vehicle tool kit
items back into the storage well.
G
i
The removed road wheel cannot be stored in
the spare wheel well under the cargo compart-
ment floor, but should be transported in the car-
go compartment wrapped in a protective cover.
Vehicles with collapsible tire
(ML 63 AMG only):
Vehicles with TPMS or Advanced TPMS*:
Do not activate the tire inflation pressure moni-
tor until a full size wheel/tire with functioning
sensor has been placed back into service on the
vehicle.
Inflate collapsible tire only after the wheel is
properly mounted.
Inflate the collapsible tire using the electric
pump (୴ page 485) before lowering the
vehicle.
1-5 Wheel bolts
̈
Tighten the five wheel bolts evenly, fol-
lowing the diagonal sequence illustrat-
ed (1 to 5), until all bolts are tight.
Observe a tightening torque of
110 lb-ft (150 Nm).
̈
Vehicles with scissors-type jack:
Attach ratchet to vehicle jack in such a
way that the word DOWN can be seen.
̈
̈
Lower the vehicle until its resting fully
on its own weight.
Warning!
G
̈
Vehicles with screw-type jack:
Turn crank counterclockwise.
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
̈
Vehicles with scissors-type jack:
Turn ratchet in Direction of DOWN.
110
lb-ft (150 Nm).
Remove the jack.
487
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.