Controls in detail
3-zone automatic climate control*
Activating
Residual heat and ventilation
Activating
̈
Adjust the temperature, air volume and
air distribution (୴ page 220).
̈ Switch off the ignition (୴ page 39).
̈ Press button9 (୴ page 220).
With the engine switched off, it is possible
to continue to heat or ventilate the interior
for up to 30 minutes. This feature makes
use of the residual heat produced by the
engine.
̈
Press button; (୴ page 220).
The indicator lamp on the button
comes on.
The indicator lamp on the button
comes on.
Deactivating
i How long the system will provide heating
depends on
The driver-side settings are used for all
temperature zones.
̈ Press button9.
ț
ț
the coolant temperature
the battery voltage
The indicator lamp on the button goes
out.
Deactivating
Regardless of the temperature and air volume
set on the automatic climate control panel, an
interior temperature is aimed at by 72°F (22°C)
and the blower runs on low speed to protect the
vehicle battery.
̈
Press button; (୴ page 220) again.
i The residual heat is automatically turned off:
The indicator lamp on the button goes
out.
ț
ț
ț
ț
when the ignition is switched on
after about 30 minutes
i If you manually set the temperature, air vol-
ume or air distribution for the passenger side or
the rear passenger compartment when the
MONO setting is active, the MONO setting will
be switched off.
if the coolant temperature is too low
if the battery voltage drops
230
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.